Brand : Generic (Imported)
100X16 mm (4-inch) #100 Grit Fiber Sanding Disc of Angle Grinder for Metal and Wood Smoothening, pack of 100
SKU : TI-1M-48829
MRP :
₹1257
-
1
+
Get Extra ₹19 OFF on Prepaid Orders
Delivery By: Nov 18 - Nov 20
Add to Cart
Buy Now
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
The 100 x 16 mm (4-inch) #00 Grit Fiber Sanding Disc is a durable, fine-grade abrasive accessory for an angle grinder, featuring an extremely fine #00 grit bonded to a rigid vulcanized fiber backing. This construction allows for light material removal and surface preparation at high speeds, making it ideal for final blending, smoothing minor imperfections, and cleaning both metal and wood surfaces before applying paint or a final finish.
Country of origin: China
Specification
  • Brand: Generic (Imported)
  • Weight (Approx.) : 25 gm
  • Diameter: 100 mm (4 inches)
  • Bore Size (Hole): 16 mm (5/8 inch)
  • Backing Material: Vulcanized Fibre
  • Abrasive Grain: Aluminum Oxide or Silicon Carbide (Used for fine finishes)
  • Grit: 100
  • Max Operating Speed: Typically up to 15,300 RPM
  • Qty: 100

Description
The 100 x 16 mm (4-inch) Fine Grit Fiber Sanding Disc is a circular abrasive accessory designed for use with an angle grinder and a supporting pad. While #00 grit is highly uncommon for this type of high-speed disc, this tool is intended for light material removal, surface preparation, and fine smoothing. It features abrasive particles bonded to a rigid vulcanized fiber backing, providing stability for the high RPMs of the grinder. Due to its expected fine grit texture, this disc is best suited for blending imperfections, cleaning surfaces before painting, and achieving a smoother finish on both metal and wood where minimal material removal is required.

Features

 :
  • Fine Finish: Designed for light smoothing and achieving a very fine finish (like a polishing effect).
  • High Stability: Uses a vulcanized fiber backing to remain rigid and stable even at the high speeds of an angle grinder.
  • Heat Resistant: The strong resin bond helps the abrasive grains resist heat, increasing the disc's working life.
  • Light Material Removal: Ideal for blending marks and preparing surfaces where aggressive grinding is not needed.
  • Standard Compatibility: The 4-inch size and 16 mm bore fit most standard angle grinders with the correct backing pad.

Applications

 :
  • Light blending of imperfections.
  • Final surface preparation before painting or priming metal.
  • Smoothing minor surface defects on wood.
  • Cleaning mild discoloration or surface scale.
  • Achieving a very smooth finish on metal surfaces.
Maintenance
Dry Storage.
Check for Clogging.
Inspect Before Use.
Discard damaged discs

Usage

 :
  • Wear Safety Gear.
  • Start Away.
  • Shallow Angle.
  • Light Pressure.
  • Keep Moving.
Fitting Guidance
  • Disconnect Power: Always unplug the corded angle grinder or remove the battery from the cordless model.
  • Attach Backing Pad: Place the correct size (4-inch) Backing Pad onto the grinder spindle, ensuring it sits flat.
  • Mount Disc: Center the Fiber Disc onto the Backing Pad. Ensure the abrasive side (the side with the grit) is facing outward.
  • Secure Nut: Thread the retaining nut onto the spindle.
  • Tighten Firmly: Press the spindle lock and use the wrench to tighten the nut firmly, but avoid over tightening.
Precautionary Guidance (Safety Tips):
  • Wear Safety Gear (Glasses, Face Shield, Gloves).
  • Check Speed Rating.
  • Use the Proper Backing Pad.Secure the Workpiece.
  • Avoid Excessive Pressure.
  • Keep Flammables Clear.
  • Wait for Disc to Stop Before Setting Down.
Select attribute