- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: Really
Really RAPL-HPA-6302, 2 Stroke Hand Push Earth Auger of 63cc Engine with 12 inch (30.48 cm) Bit
SKU: TI-RR-11039
₹18900 (Including GST)
MRP : ₹23580
Get extra ₹284 Discount (On Checkout)
Delivery By: May 16 - May 18
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
2 Stroke Hand Push Earth Auger
12 inch (30.48 cm) Auger Bit
3 HP Power and 63 CC Displacement
Country of origin: China
Description
- Really 63 CC Trolley Type Hand Push Earth Auger with one wheel, drilling a 12-inch (30.48 cm) hole. The Earth Auger is appropriate for drilling tasks on lawns, farms, nurseries, and greenhouses.
- Use for drilling in agricultural fields for banana plantations, vegetable crops, gardens, fishing, and geophysical research.
- Additionally, it is employed by horticultural plantations, highway authorities, and construction and fencing contractors.
Features
:- Handle with a pleasant and balanced ergonomic design.
- Excellent vibration-reduction technology that makes your work easier.
- Lightweight 63cc 2-stroke engine with excellent fuel economy.
- Low noise, simple start-up, Non-Foldable.
Specification
:- Brand: Really
- Weight (Approx.) : 25 kg
- Model No : RAPL-HPA-6302
- Product Type : Hand Push Earth Auger
- Brand : Really
- Displacement : 63 CC
- Power : 3 HP
- Engine Type : 2 Stroke
- Fuel Used : Petrol
- Fuel Mixing Ratio : 1 : 25
- Drill Range : 40 mm–300 mm
- Blade Length : 80 cm
- Depth Size : 2.5 feet (76.2 cm) Approx
Note : Colour may vary
Usage
:Before you start:
> Check the fuel level and add fuel if necessary.
> Attach the desired auger bit to the shaft and ensure it is fastened properly.
> Wear the necessary safety items like boots, gloves, etc for protection.
Starting the machine:
> Set the choke to the "ON" position.
> Prime the engine by pumping the primer bulb until fuel is visible in the line.
> Place the auger bit at the desired drilling location.
> Hold the throttle lever slightly open.
> Grip the starter cord and pull it firmly to start the engine.
> Once the engine starts, gradually release the choke.
> Adjust the throttle as needed to maintain the desired drilling speed.
> Slowly engage the auger into the ground, allowing the machine's weight to do most of the work.
