58 cc Chainsaw With 22 inch(55.88 cm) Guidebar
8500 RPM
Suitable for Landscaping Purposes
- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand : Really
Really Professional 58-cc Petrol Chainsaw with 22 inch Guide Bar | Used for Cutting Tree, Firewood | RAPL-CS-5830-22
SKU : TI-RR-17757
MRP :
₹8990
-
1
+
Delivery By: Jun 21 - Jun 23 
Easy Return
& Refund
& Refund
Quality
Assurance
Assurance
Trusted
Delivery
Delivery
After Sales
Assistance
Assistance
Buyer
Protection
Protection
Short Description
Country of origin: China
Specification
- Brand: Really
- Power : 2.3 kw
- Fuel Used : Petrol
- Displacement : 58 cc
- Stroke : 2
- Model No : RAPL-CS-5830-22
- Fuel Used : Petrol
- Displacement : 58-cc
- Fuel Used : Petrol
- Engine Power : 2.3 kw
- Ideal Speed : 3200 + 200 RPM
- Engine Speed : 8500 RPM
- Bar Length : 22 inch(55.88 cm) Approx.
Usage :
- This chainsaw can be used to clear fallen trees or cutting through dense vegetation to create pathways and clearings.
Description
This Really chainsaw comes with 22 inch(55.88 cm) guide bar and 58 cc displacement which makes it more durable
It has 2.3kW engine with 8500 RPM engine speed
This chainsaw can be used in activities such as tree felling, limbing, bucking, pruning, cutting firebreaks
Features
:- Low-vibration system with damper springs to absorb vibration from engine to integrated front and rear handles.
- Enhanced air filtration; centrifugal separation system effectively removes dust particles away from intake air and reduces dust stuck on the filter.
- Easy start-up with spring-assisted recoil starter reduces user’s fatigue by the drastic reduction of resistance caused when the starter rope is pulled.
Usage
:Before you start :
> Check the petrol (fuel) supply and add petrol if required.
> Take all the necessary safety precautions.
Starting the engine :
> Check the chain brake and engage it so that the chain don't move while operating.
> Turn the on/off switch to the "on" position and open the choke.
> Press the fuel primer button several times to fill the fuel from the tank into the carburetor.
> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.
> Adjust the choke to the “run” position once the engine is running.
> Allow the engine to be idle for about a minute to get warm and start working.
> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.
Questions & Answers (0)
Product Image Gallery
