• Model No : 107 Seal Plus 
• Chemical base : Part A : Acrylic polymer                                                                                                                                                                 Part B : Portland cement with selected aggregates and additives
• Appearance/ Color : Cement grey slurry
• Shore A hardness : ~90
• Tensile strength : ~1.3 N/mm²
• Elongation at break : ~110 %
• Tensile adhesion strength : ~1 N/mm2
• Water penetration under pressure : ~0 mm penetration at 5 bar for 72 h
• Compatible Material : Concrete
• Fresh mortar density : ~1.90 kg/L (Part A+B mixed, +27 °C)
• Consumption : Approx. 1.5 to 2.0 kg/m² in 2 coats 
• Ambient air temperature : +10 °C min. / +40 °C max.
• Mixing ratio : Part A : Part B = 1 : 2.5 
• Substrate temperature : +10 °C min. / +40 °C max.

Features

• Easy to apply by brush, spray or flat trowel
• No additional water is required to make the slurry
• Pre-batched components with consistent quality
• Easy and fast mixing
• Highly water resistant, reduces saltpetre action and prevents carbonation
• Protects concrete from chloride penetration
• Non-corrosive to steel and iron
• Flexible enough to bridge hairline crack
• Bonds well to all damp substrates
• Good abrasion resistance
• Good adhesion to reinforced concrete, mortar or masonry
• Fast curing
  

Applications