- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: SIKA
Sika Emaco 25 Kg Polymer Modified Grey Powder Waterproofing Chemical (S 488 PM)
SKU: TI-SE-37148
730 people have viewed this recently 
Delivery By: Dec 10 - Dec 12 
MRP : ₹3000 ₹2399
20% OFF!
730 people have viewed this recently Delivery By: Dec 10 - Dec 12 Easy Return
& Refund
& Refund
Quality
Assurance
Assurance
Trusted
Delivery
Delivery
After Sales
Assistance
Assistance
Buyer
Protection
Protection
₹2399 (Including GST)
MRP : ₹3000
20% OFF!
Get Extra ₹36 OFF on Prepaid Orders
QTY :
-
1
+
Short Description
Sika Emaco 25 Kg Polymer Modified Fibre Reinforced Waterproofing Repair Mortar
25 Kg Pack
Grey Powder Repair Mortar
Country of origin: India
Specifications
- Brand: SIKA
- Quantity : 25 kg
- Model No .: S 488 PM
- Composition : Polymer containing cementitious mortar with different additives and synthetic fibres
- Appearance and Colour : Grey Powder
- Maximum Grain Size : ~4 mm
- Tensile Adhesion Strength : ≥ 1.5 N/mm²
- Chloride ion permeability : ≤ 1000 Coulomb
- Fresh mortar density : ~2.19 kg/l (+25 °C)
- Layer thickness : Min 10 mm-Max 50 mm
- Mixing ratio : 3.5 - 4.0 L of water per 25 kg bag
- Substrate temperature : +5 °C min. / +40 °C max.
Description
- Sika Emaco S 488 PM is a polymer modified, single component, cementitious, synthetic fibre reinforced, structural repair mortar that contains Portland Cement, well graded sands, specially selected fibers and additives to improve the fresh and hardened properties.
- Suitable for use in hot and tropical climatic conditions.
Features
:SikaEmaco S 488 PM provides the following beneficial properties :
- Structural repair
- Can be spray applied - rapid application of large
- quantities
- Rapid strength gain and high final strength
- Good water and oil resistance
- Low shrinkage behaviour
- High abrasion resistance
- Good adhesion
- Easy to apply
- Low permeability
Applications
:Sika Emaco S 488 PM is used for structural repair work and suitable for :
- Restoration works, repair of spalling and damaged concrete in buildings, bridges, infrastructure and superstructure works.
- Structural strengthening by increasing the bearing capacity of the concrete structure by adding mortar
- (section enlargement).
- Preserving or restoring passivity by increasing cover with additional mortar and replacing contaminated
- or carbonated concrete.
Questions & Answers (0)
Select attribute
