Oxi Power 28" Butter Cut Silver Brazed Concrete Cutting Diamond Blade, 50mm Bore High-Speed Saw Wheel 2206

The Oxi Power Model 2206 is a high-performance 28-inch silver-brazed concrete cutting blade with a 50mm inner bore, featuring a signature yellow core design. Optimized for smooth, low-vibration slicing through reinforced platforms, asphalt, and brick walls, it delivers premium professional-grade durability across wet and dry applications.

• Item Code : 2206

• Size (Diameter): 28 Inches (approx. 710 mm)
• Bore Size (Inner Diameter): 50 mm
• Core Material: High-Strength Mild Steel Core
• Segment Connection: Premium Silver Brazed
• Color: High-Visibility Yellow
• Core Coating: Anti-Corrosive Industrial Enamel
• Cutting Mode: Suitable for both Wet and Dry operations (Wet recommended for maximum longevity)

Features

• Premium Silver Brazing Construction: Deeply reinforces segment retention to withstand heavy mechanical impact and high-friction loads.

• Aggressive "Butter Cut" Action: Provides fast, smooth slicing action through tough aggregates with drastically reduced friction and dragging.
• Optimized Dynamic Balance: Reduced vibration levels limit operator fatigue and preserve the structural integrity of your floor saws or walk-behind machines.
• Thermal Core Windows: Integrated ventilation paths promote optimal cooling to prevent structural warpage during intensive cutting cycles.
• Clean Edge Slicing: Specially designed to yield minimal edge chipping on cured platforms and hard brick wall surfaces.
  

Applications

• Slicing deep expansion joints on heavily reinforced concrete highways and runways.

• Cutting through thick concrete platforms, foundation slabs, and precast utility beams.
• Scoring structural brick walls, retaining structures, and hard stone masonry.
• Precision trenching through thick asphalt layer matrices for under-road maintenance.
• Controlled architectural demolition of thick floor layouts and core footings.

Usage

• Directional Alignment: Ensure the arrow on the blade core perfectly aligns with the directional rotation of your machine spindle.

• RPM Optimization: Operate within the recommended speed boundaries; do not force or push the blade beyond its native cutting rate.
• Secure Spindle Fit: Clean the machine flange thoroughly and secure the 50mm bore interface tightly to eliminate radial wobble.
• Fluid Cooling (Recommended): Apply continuous water flow where possible to flush hot abrasives out and lower working temperatures.
• Linear Penetration: Maintain straight paths during cuts; avoid twisting or tilting the blade sideways within the groove track.

Maintenance

• Inspect the silver-brazed segments before every shift for micro-cracks, uneven wear, or structural stress markers.

• Wash down the blade after use to clear packed concrete sludge, asphalt tar residue, and dust accumulation.
• Store the 28-inch blade hanging vertically or lying flat on a smooth surface; never lean it heavily at an angle to avoid core warpage.
• Run the blade briefly through an abrasive dressing stone if the segment faces become glazed or dull to expose fresh diamond grit.