48V 4A Lead-Acid Smart Battery Charger for E-Bikes, Scooters & Golf Carts

This premium quality, unbranded 48V 4A Lead-Acid Battery Charger is a highly reliable, intelligent power accessory engineered specifically to recharge electric scooters, e-bikes, and golf carts safely. Featuring a smart auto-cutoff safety mechanism and visual LED indicators, it ensures your vehicle remains consistently operational without risking battery overcharge.

• Primary Use: Electric Vehicles & Mobility Equipment Charging

• Input Voltage: AC 100V – 240V (Universal Compatibility)

• Input Frequency: 50/60 Hz

• Output Voltage (Nominal): 48V DC

• Output Current: 4 Amps

• Battery Compatibility: Sealed Lead-Acid Batteries

• Shell Material: High-Impact Heat-Resistant PC/ABS Polymer

• Connector Type: Standard 3-Pin / T-Type EV Charging Port

• Efficiency: >85% Energy Conversion Rate

• Weight : 600 gm

Features

• Optimized 3-Stage Smart Charging: Implements a multi-stage intelligent charging sequence (Constant Current, Constant Voltage, and Trickle/Float Charge) to maximize battery health.

• Auto-Cutoff Protection: Intelligent integrated circuits sense peak capacity and automatically stop active current transmission, completely preventing battery bloating or degradation.

• Clear LED Status Display: Built-in dynamic LED indicators transition from Red (Charging in progress) to Green (Fully Charged/Float mode) for hassle-free monitoring.

• Advanced Internal Safety Suite: Fully shielded against standard electrical hazards including over-voltage, over-current, reverse-polarity connection, and short-circuit faults.

• Active Cooling Fan Protection: Outfitted with an automated, silent internal exhaust fan that actively regulates thermal thresholds during prolonged, high-load charging cycles.

Applications

• Electric Two-Wheelers: Ideal for e-bikes, electric scooters, and battery-assisted mopeds requiring a 48V configuration.

• Utility & Commercial Fleets: Perfect for electric rickshaws (E-rickshaws), golf carts, and small automated warehouse tugs.

• Mobility Assistance Devices: Compatible with high-capacity motorized wheelchairs and medical mobility scooters.

• Renewable Energy Backup Systems: Can be used to recharge 48V localized solar storage bank arrays built with lead-acid configurations.

Usage

• Ensure your electric vehicle or battery terminal system is switched completely to the "OFF" position.

• Securely insert the charger's output DC connector pin into your vehicle's designated charging port interface.

• Plug the AC input power cord into a standard household wall outlet and flick the power switch ON; confirm the LED glows red.

• Once the indicator turns solid green, signify a 100% capacity level, disconnect the AC plug from the wall first, then remove the DC cable from the vehicle.

Maintenance

• Keep the external housing free from dust accumulation, especially near the active exhaust and intake vents.

• Always operate the unit in well-ventilated, dry, and cool spaces away from direct flame or localized moisture.

• Avoid pulling or jerking the wires heavily to preserve internal soldering points near the cable stress reliefs.

Shipping Weight & Dimensions