Features

• Rated Output : ~7.5 kVA (~6 kW) at rated rpm, according to the Kirloskar 7.5-20 kVA series spec.
• Voltage & Phase : Standard single phase 230 V (with option for 415 V three-phase version in some listings) at 50 Hz.
• Power Factor : 0.8 (lagging) as per ISO 8528 for this rating.
• Noise Level : < 75 dB(A) at 1 metre for canopy version (as stipulated for the 7.5 kVA range) which suits quieter installations.
• Engine & Build : The series uses diesel engines built for durability; the spec sheet lists models such as “2R550NA 4G1” for 7.5 kVA.
• Compact Dimensions & Weight : For example, dry weight ~545 kg, dimensions ~1600 × 760 × 1050 mm for the 7.5 kVA canopy version.
• Electric Start : Provided electric (battery) start for ease of use in standby situations.
• Service & Support : As part of the Kirloskar family, the genset benefits from wide after-sales & spare parts network in India, enhancing reliability and maintainability.

Applications

• Residential backup power : For homes, small apartments, villas - able to support lighting, fans, TVs, refrigerators and moderate loads during power outages.

• Small business / commercial use : For shops, clinics, offices, small workshops needing dependable standby power to keep essential equipment running (computers, lighting, AC units) during grid interruptions.
• Remote & mobile operations : Such as construction sites, field offices, mobile workshops, outdoor events — where mains supply is unreliable or unavailable and a portable diesel generator is required.
• Agricultural / rural applications : For farms or rural locations where grid supply is intermittent — to power pumps, ventilation, lighting, smaller motors within the 6 kW class.
• Light industrial or workshop support : For light machining, tools, motors or small three-phase loads (if this version supports three-phase) within the capacity limits; useful in small manufacturing or repair shops. Because the unit is ~7.5 kVA, it is not intended for large industrial plant loads or heavy three-phase motor drives (which would need much higher kVA ratings). Proper sizing of load is crucial.

Usage

• Installation : Place the generator on a level, stable, non-combustible surface, in a well-ventilated outdoor or semi-outdoor area. Ensure exhaust fumes are safely routed away from human occupancy, and clearance for airflow is provided.
• Before Starting : Check engine oil level, coolant level (if applicable), fuel tank level, battery charge (for electric start).
• Ensure the control panel is set to “Standby/Ready”, disconnect major loads initially.
• Inspect for any visible leaks, check air filter and ensure fuel is fresh and uncontaminated.
• Starting Procedure : Use the electric start to crank the engine.
• Let the engine warm up without load for approx 1-2 minutes to stabilise.
• Gradually apply load - avoid a full instantaneous heavy load especially after cold start.
• Loading and Operation : Ensure the total connected load does not exceed rated capacity (~7.5 kVA) and leave margin (e.g., 20-30%) for motor starting/surges. Use appropriate cable sizing, circuit protection (MCB/MCCB) and proper earthing. Monitor voltage, frequency, oil pressure, engine temperature and listen for unusual vibrations or noises. If powering sensitive electronics (computers, servers, medical equipment), although the output quality is good, consider adding a UPS or voltage stabiliser for additional protection.
• Shutdown : Remove or reduce load first; allow the engine to run unloaded or lightly loaded for a few minutes to stabilise.
• Then switch off the generator; if storing for a long period, drain or treat fuel, disconnect battery, cover generator and maintain dry conditions.