- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
<
>
Brand: Generic (Imported)
Heavy Duty 2-stroke, 2.6 HP 52-cc with 4 and 10 inch Drill Bit For Earth Auger/ Post Hole Digger Machine
SKU: RON-EA-003
12 people have bought this recently 
Delivery By: Jun 25 - Jun 27 
MRP : ₹11500 ₹8950
22% OFF!
12 people have bought this recently Delivery By: Jun 25 - Jun 27 Easy Return
& Refund
& Refund
Quality
Assurance
Assurance
Trusted
Delivery
Delivery
After Sales
Assistance
Assistance
Buyer
Protection
Protection
₹8950 (Including GST)
MRP : ₹11500
22% OFF!
Get Extra ₹134 OFF on Prepaid Orders
QTY :
-
1
+
Short Description
Heavy Duty 2-stroke, 2.6 HP 52-cc
with 4 and 10 inch Drill Bit
For Earth Auger/ Post Hole Digger Machine
Country of origin: China
Specifications
- Brand: Generic (Imported)
- Power : 2.6 hp
- Weight (Approx.) : 13.5 kg
- Fuel Used : Petrol
- Displacement : 52 cc
- Stroke : 2
- Engine Type : Single Cylinder
- Cooling Type : Air-cooled
- Fuel Used : Petrol
- No Load Speed : 9000 RPM
- Bit Length : 80 cm (Approx.)
- Oil mixing : 40 ml (2T) oil/1L of Petrol
- Fuel Tank Capacity : 1 liter
- Ignition : C.D.I
- Fuel Consumption : 580 ml/hr (Approx.)
- Digging Capacity : 70-80 Holes per 1 liter Petrol (Approx.)
Note : This machine comes with a 4 inch (10.16 cm), and 10 inch (25.4 cm) free auger bit.
Description
Heavy Duty 2-stroke, 2.6 HP 52-cc with 4 and 10 inch Drill Bit For Earth Auger/ Post Hole Digger Machineis used in agriculture for digging holes in the soil. It makes holes for plantations or for erecting poles. It is much easier to dig soil with this machine and the process takes less time. This machine comes with a petrol engine with different sizes of bits. Hand Earth Auger can dig a hole up to 80 cm deep, depending on the diameter of the bit.
Accessories
:- 4 inch (10.16 cm), and 10 inch (25.4 cm) Auger Bit
- Guide Manual
- Toolkit
- Oil Mixing Can
Applications
:- Used for digging soil in different kinds of soil.
Usage
:Before you start:
> In a clean fuel container, mix 2T oil with petrol in the desired ratio (40 ML Oil in 1 Liter Petrol)
> Shake the container well to mix the fuel.
> Wear the necessary safety items like boots, gloves, etc for protection.
> Attach the appropriate auger bit for the desired hole size.
Starting the machine:
> Engage the choke lever on the carburetor to enrich the fuel mixture for easier starting.
> Pump the primer bulb several times to fill the fuel line with fuel.
> Mark the location where you want to drill the hole.
> Hold the throttle lever slightly open.
> Pull the starter cord firmly and consistently until the engine starts.
> Now, gently guide the auger bit into the ground, applying slight downward pressure to initiate drilling.
