> Check the fuel level and add fuel if necessary. 

         > Attach the desired auger bit to the shaft and ensure it is fastened properly. 

         > Wear the necessary safety items like boots, gloves, etc for protection.

         > Set the choke to the "ON" position. 

         > Prime the engine by pumping the primer bulb until fuel is visible in the line.

         > Place the auger bit at the desired drilling location. 

         > Hold the throttle lever slightly open. 

         > Grip the starter cord and pull it firmly to start the engine. 

         > Once the engine starts, gradually release the choke. 

         > Adjust the throttle as needed to maintain the desired drilling speed.

         > Slowly engage the auger into the ground, allowing the machine's weight to do most of the work.