- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: Pro Tools
Pro Tools Professional 65-cc Petrol Chainsaw with 18 inch Guide Bar for Tree, Wood Cutting and Landscaping | 6522P
SKU: rb31
₹10350 (Including GST)
Get extra ₹155 Discount (On Checkout)
Delivery By: May 14 - May 16
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
Pro Tools Professional 65-cc Petrol Chainsaw
18-inch (45.72 cm) Guide Bar Length
Country of origin: China
Description
Unlock Your Outdoor Potential with the Pro Tools 6522P Gasoline Chain Saw! Experience the power and versatility of the Pro Tools 6522P 18-inch (45.72 cm) Gasoline Chain Saw. Designed for efficiency, this robust saw features an 18-inch bar and chain, making it ideal for cutting through thick brush and trees. Whether you're tackling a landscaping project or maintaining your garden, this petrol chain saw is the perfect companion for any outdoor task. Get ready to elevate your outdoor work with the Pro Tools 6522P!
Features
:- Gasoline/Two-Cycle Oil Ratio 25:1
- Very Reliable & Efficient.
- Used for Heavy Work Load.
Specification
:- Brand: Pro Tools
- Power : 2.7 kw
- Weight (Approx.) : 10
- Fuel Used : Petrol
- Displacement : 65 cc
- Stroke : 2
- Model No : 6522P
- Power : 2.7 kw
- Displacement : 65-cc
- Oil Capacity : 260 ml
- Speed : 3100 - 300 RPM
- Fuel Used : Petrol
- Bar Length : 18 inches (45.72 cm) Approx.
- Fuel Tank Capacity : 550 ml
- Fuel Consumption: 1 litre/ 45 minutes to 1 hour
- Weight : 10 Kg (Approx.)
Applications
:- Used for cutting trees, bamboos, woods, etc.
Usage
:Before you start :
> Check the petrol (fuel) supply and add petrol if required.
> Take all the necessary safety precautions.
Starting the engine :
> Check the chain brake and engage it so that the chain don't move while operating.
> Turn the on/off switch to the "on" position and open the choke.
> Press the fuel primer button several times to fill the fuel from the tank into the carburetor.
> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.
> Adjust the choke to the “run” position once the engine is running.
> Allow the engine to be idle for about a minute to get warm and start working.
> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.
