Glaze Plus EPO-GOLD-5010 Clear UV-Resistant Gel Structural Adhesive for Marble & Granite Natural Stone Bonding

• Product Form: Gel form
• Transparency: Transparent crystal clear
• Mixing Ratio: Two to one parts by volume or weight
• Hardening Time: Forty five minutes at twenty five degrees Celsius
• Minimum Application Thickness: Greater than one millimeter
• Upper Temperature Limit: Above ninety degrees Celsius
• Lower Temperature Limit: As low as minus thirty degrees Celsius
• Cure Profile: Ninety percent cure within one hour
• Chemical Stability: Chemically inert solid

Features

• Non-Sag Formula: Gel consistency allows seamless vertical, overhead, and architectural installation without dripping or slipping.
• 100% UV Resistant & Non-Yellowing: Perfect for both indoor and outdoor installations with zero color degradation or ambering over time.
• High Bonding Strength: Possesses superior tensile and bearing capacity, forming permanent, unbreakable bonds.
• Thermal Stability: Retains excellent elasticity and full structural strength across massive temperature extremes without softening or embrittlement.
• Moisture Tolerant: Performs exceptionally well under high humidity and challenging job site conditions.
• Stress-Free Curing: Hardens evenly into a solid, chemically inert profile that resists aging and does not shrink.

Applications

• Natural Stone Joining: Seamless bonding and structural repair of premium marble, granite, and quartzite.
• Cast and Engineered Stone: Joining, laminating, and fabricating quartz, terrazzo, and engineered surfaces.
• Modern Building Materials: High-strength structural fixation of sintered porcelain, large-format slabs, and ceramics.
• Vertical and Overhead Installations: Securing structural stone joints, wall cladding, and ceiling panels.
• Civil Engineering and Renovation: Structural repair of concrete elements, masonry bonding, and fiberglass fixing.

Usage

• Surface Preparation: Ensure all contact surfaces are clean, dry, free from oil, grease, wax, and slightly roughened with sand or grinding paper to ensure mechanical anchoring.
• Dispensing and Proportioning: Thoroughly measure out two parts of Component A to one part of Component B by volume or weight.
• Mixing Process: Blend both components continuously until a completely uniform, homogeneous shade and texture are achieved.
• Application Technique: Apply the mixed gel paste smoothly onto the prepared surface keeping the layer thicker than one millimeter for precise, sensitive adhesion.
• Curing Protocol: Allow the structural joint to sit undisturbed; it will set within forty five minutes and can be machined or polished after initial hardening.

Maintenance

• Store unused containers tightly sealed in their original packaging in a cool, dry, and well-ventilated area away from direct sunlight.
• Ensure the container caps for Component A and Component B are closed tightly immediately after use to avoid air exposure and contamination. 
• Clean application tools immediately after use using an epoxy-compatible solvent before the gel hardens.