Glaze Plus EPO-SEAL-1015 Clear High Gloss Ultra UV Stable Epoxy Resin Coating

• Product Type: Two component epoxy resin system
• Model Number: EPO-SEAL-1015
• Mixing Ratio by Weight: Fifty parts hardener to One hundred parts resin
• Mixing Ratio by Volume: One part hardener to One part resin
• Curing Temperature Range: Fifteen degrees Celsius to Thirty two degrees Celsius
• Viscosity Level: Low viscosity liquid
• Solvent Content: Zero percent solvent free

Features

• Crystal Clear Finish: Formulated as a water-clear, ultra-high gloss system that maintains long-term clarity.
• Self-Leveling & Low Viscosity: Flows easily into cracks and across surfaces to create a perfectly flat, smooth coating.
• Extended UV Stability: Optimized to resist yellowing and degradation caused by exposure to ultraviolet light.
• Excellent Air Release: Formulated to naturally release trapped air bubbles during application for a flawless finish.
• Environmentally Friendly Profile: Solvent-free composition with a significantly reduced odor for safer, cleaner indoor usage.
• Efflorescence Protection: Formulated to protect surfaces against hard cement haze and salt bloom efflorescence.

Applications

• Resin Art and Crafts: Perfect for creating clear coatings over artwork, canvas paintings, and custom crafts.
• Doming Applications: Excellent for building a raised, high-gloss clear protective dome over labels, pins, stickers, and jewelry.
• Marble Crack Filling: Fills fine cracks, micro-fissures, and pores in marble, granite, and other natural stones to reinforce structural integrity.
• Surface Coating: Provides a durable protective coat on countertops, tabletop wood, stone slabs, and decorative surfaces.

Usage

• Surface Preparation: Ensure the target substrate is completely clean, dry, and free of dust, oils, grease, or previous coatings.
• Measuring: Use two separate clean plastic containers of equal volume to accurately measure the resin component A and hardener component B.
• Mixing: Pour both components into a mixing vessel. Stir thoroughly for three minutes, ensuring you scrape the sides and the bottom of the container to eliminate unmixed pockets.
• Application: Pour the mixed epoxy onto the surface immediately. Use a notch trowel, spreader, or roller to distribute the resin evenly.
• Curing: Allow the applied coat to self-level and cure undisturbed at a room temperature between fifteen degrees Celsius and thirty two degrees Celsius.

Maintenance