Metro Safety Full Body Fall Arrest Safety Harness with Dorsal D-Ring and 40mm PP Webbing EN 361-2002 Certified (SB 1121)

• Model: SB 1121
• Harness Type: Full Body Fall Arrest Harness
• Primary Attachment Point: 1 x Back Dorsal D-Ring
• Webbing Material: High-Strength Polypropylene (PP) Webbing
• Webbing Width: 40 mm
• Adjustment Modules: Adjustable shoulder straps, adjustable chest strap, and independent adjustable thigh/leg loops
• Stitching Type: Reinforced automatic structural strength pattern
• Hardware Finish: High-tensile pass-through steel friction buckles
• Safety Certification: Conforms to EN 361-2002

Features

• Fall Arrest System Integration: Features a high-tensile rear dorsal D-ring explicitly configured to serve as the mandatory anchor point for arresting dynamic industrial drops safely.
• Anti-Tangle Dual Color Scheme: Employs a contrasting strap color layout to visually differentiate the shoulder section from the leg loops, effectively minimizing twisted webbing and reducing donning time.
• 40mm PP Webbing Matrix: Constructed from industrial-grade 40mm wide polypropylene fibers engineered to deliver an exceptional strength-to-weight ratio and dependable structural stability.
• Comprehensive Sizing Adjustability: Outfitted with fully adjustable shoulder, chest, and thigh straps to ensure a snug, close-to-body profile over varying layers of seasonal work clothing.
• Automated Safety Stitch Grid: Structural joint interfaces rely on machine-controlled automated stitching patterns that lock the webbing tightly to guarantee consistent joint strength parameters under sudden load.
• Certified Site Compliance: Manufactured and tested to meet rigid height-protection standards in strict conformance with the EN 361-2002 standard specification.

Applications

• High-Rise Structural Construction: Fundamental fall prevention gear for masonry workers, steel builders, and concrete crews operating near open building edges or un-railed elevator shafts.
• Modular Scaffolding Maintenance: Essential personal protective equipment for staging personnel erecting, altering, or inspecting multi-tier scaffold platforms at high elevations.
• Industrial Plant Overhaul: Highly suited for technical maintenance crews inspecting overhead gantry cranes, high-clearance manufacturing grids, and elevated conveyor frameworks.
• Commercial Roofing Operations: Crucial restraint protection during industrial metal roof shed installations, solar panel alignments, and exterior facade trim placements.

Usage

• Thoroughly inspect the 40mm PP webbing paths, back dorsal D-ring, metallic adjusting buckles, and structural stitch matrices for any cuts, thermal burns, fraying, or chemical erosion prior to use.
• Hold the harness upright by the rear dorsal D-ring and shake it gently to allow all contrasting shoulder, chest, and thigh straps to fall free naturally without being twisted.
• Guide your arms through the shoulder loops exactly like donning a standard vest, making sure that the dorsal D-ring seats flatly on your upper back between your shoulder blades.
• Pull the independent leg loops comfortably up between your thighs and secure them snugly through their respective pass-through steel friction buckles.
• Fasten the front chest strap connection buckle firmly, then balance the shoulder webbing adjustments dynamically to achieve a secure, upright skeletal posture.
• Tighten all adjustment zones until the harness fits closely—firm enough to protect your body during an impact, but leaving a sufficient gap to pass a flat hand smoothly beneath the straps.
• Securely latch a certified, shock-absorbing safety lanyard or a retractable self-locking lifeline block to the back dorsal D-ring before crossing into any designated fall-hazard perimeters.