Dophin C-1600 Powerful Canister Aquarium Filter (Mechanical Filtration for Salt Water and Fresh Water)
SKU : BM-DA-20211884
MRP : ₹10200
₹8500
17% OFF!
-
1
+
1035 people have viewed this recently
Get Extra ₹128 OFF on Prepaid Orders
Delivery By: Jul 14 - Jul 16
Add to Cart
Buy Now
Easy Return & Refund
Quality Assurance
Trusted Delivery
After Sales Assistance
Buyer Protection
Short Description
C-1600 Powerful Canister Aquarium Filter for Fish Farming ,
Powerful , High Efficiency ,Easy to Instal Power Filter.
Country of origin: India
Specification
Brand: Dophin
Weight (Approx.) : 1.5 kg
Model : C-1600
Generic Name : Aqua Farming Filter
Voltage : 120 - 230 V
Power Consumption : 27 W
Frequency : 50 / 60 HZ
Type : Canister
Filtration Type : Mechanical
Max Flow Height : 210 cm
Flow Rate : 2540 Ltr / Hr
Suitable for : Up to 500 ltr Fish tank or Aquarium
Description
C-1600 Aquarium Canister Filter is placed lower than the aquarium and uses for clean water of Fish.The Dophin C-1600 Powerful Canister Aquarium Filter delivers crystal-clear water for large tanks up to 500 litres. It ensures high-flow filtration with easy maintenance. This energy-efficient filter keeps your fish healthy by removing debris and impurities. A robust design makes it reliable for freshwater and marine aquariums.
Features
:
Powerful 2540 LPH flow rate for large aquariums.
Multi-stage filtration for superior water clarity.
Energy-efficient motor with low noise operation.
Easy to install, clean, and maintain.
Suitable for both freshwater and saltwater setups.
Applications
:
Cleaning Instructions :
Close the inside of the valve head, loosen the screw an remove the inside of the valve head
To remove the power cap, open the clip on the body of the filter, then open the small clip at the top of the pump.
Remove the filter basket separately. Rinse filter sponges and materials with water
Never use hot water during the cleaning process
Clean the gasket and place it carefully when closing the pump head.
U Halves :
The filter should not be operated at water temperature above 35 degrees.
The jack to which the filter will be connected needs to be checked. Faults in the outlet can caul, deterioration of the tool. The plug of the fiter must be fully seated and fixed.
Attention should be paid to children at home. It should be in a position out of reach of children.
If the filter is to be operated in a remote position, use an appropriate extension cable.
Cleaning is recommended after unplugging.
The filter should be cleaned only with water and detergent should not be used.
The filter must be cleaned and checked continuously to ensure Its function. Worn foam and fiber should be renewed.
The filter should be careful not to damage the power cord. Should not be repaired if damaged.
Disturbances in the flow of electricity may cause a decrease in performance of the filter.
It should not be stored near heat sources.
Usage
:
The filter is used below the aquarium
To install the filter, bend and place the two valves in the place that joins the inner (in) / outer (out) written pump.
Adjust the hose to the required length
Make sure the hose is not bent, gently fox the valve heads and tighten the union nuts to ensure that the connection points of both heads are intact
Connect the other end of the In (In) hose to the inlet pipe and connect the other Out valve head hose to the fountain pipe, then turn the valve head ball.
To start, vacuum the air from the filter and press at least 4 to 5 times to fil the water. When the water outlet pipe is filled with water, stop pressing the air vent button, then plug the plug to start the filter operation.