• Diameter: 4 mm
• Roll Length: 100 meters
• Material: High-quality polyethylene (PE)
• Wall Thickness: Approximately 250 microns (10 mil)
• Designed for use in low-pressure drip irrigation systems
• UV resistant for extended outdoor durability
• Compatible with KSNM drip tape and micro irrigation fittings
• Suitable for vegetable gardens, orchards, greenhouse, and nursery irrigation
• Lightweight and flexible for easy installation and handling
• Provides precise water delivery for improved water efficiency and crop yield

Features

• Diameter: 4 mm
• Roll Length: 100 meters
• Made from high-quality polyethylene (PE)
• Flexible and lightweight for easy handling and installation
• UV resistant for prolonged outdoor durability
• Designed for low-pressure drip irrigation systems
• Compatible with KSNM drip tape and micro irrigation fittings
• Supports precise and efficient water delivery to root zones
• Suitable for vegetable gardens, orchards, nurseries, and greenhouse cultivation
• Enables easy customization of irrigation layouts for different crop needs

Applications

• Connect the 4 mm micro tube to mainlines or drip tapes to extend water delivery to plants in gardens, orchards, and nurseries.
• Use with drip emitters and micro-sprayers for precise watering tailored to plant types and spacing.
• Integrate the tubing in gravity-fed or pumped irrigation systems for steady low-pressure water supply.
• Lay the tube on the soil surface or bury shallowly to minimize evaporation and improve irrigation efficiency.
• Secure tubing with stakes or clips to position emitters accurately at root zones.
• Use in vegetable gardens, container planting, greenhouse setups, and landscaping irrigation.
• Flush tubing regularly to prevent clogging and maintain flow.
• Combine tubing with timers or automatic controllers for efficient water management.
• Adapt tube layout and emitter spacing to soil type, plant growth stage, and climate.
• Utilize for fertigation, delivering fertilizers through the irrigation system directly to roots.

Usage

• Cut the required length from the roll to reach plants from the mainline or drip tape.
• Pierce a hole in the main drip tape or poly pipe at the point where water needs to be distributed.
• Insert the micro tube into the pierced hole ensuring it is opposite to water flow to reduce clogging.
• Attach drip emitters or micro-sprayers to the tube end near the plants.
• Lay the tube on the soil surface or slightly buried and secure it with stakes.
• Connect to gravity or pump-based irrigation systems for automated watering.
• Install a timer or controller to schedule irrigation efficiently.
• Flush the tubes periodically to ensure clear water flow.
• Adjust layout and emitter spacing as per crop type, soil, and climate.
• Use in vegetable gardens, nurseries, orchards, greenhouses, and landscaping.