Brand: X1 power
X1 POWER (X1-EA70) 70CC, 3.5HP Petrol Earth Auger with 6 inch Double Spiral Bit for Hole Digging
SKU: TI-XP-89846
Estimated Delivery By: Nov 10 - Nov 12 
MRP : ₹14300 ₹10934
24% OFF!
Estimated Delivery By: Nov 10 - Nov 12 Easy Return
& Refund
& Refund
Quality
Assurance
Assurance
Trusted
Delivery
Delivery
After Sales
Assistance
Assistance
Buyer
Protection
Protection
₹10934 (Including GST)
MRP : ₹14300
24% OFF!
Get Extra ₹164 OFF on Prepaid Orders
QTY :
-
1
+
Short Description
X1 POWER (X1-EA70) 70CC, 3.5HP Petrol Earth Auger
With 6 inch Double Spiral Bit
For Hole Digging
Country of origin: China
Specifications
- Brand: X1 power
- Power : 2.6 kw
- Fuel Used : Petrol
- Displacement : 70 cc
- Stroke : 2
- Model : X1-EA70
- Displacement : 70 cc
- Rated Power : 3.5 HP (Approx. 2.6 kW)
- RPM : 7500 RPM
- Engine Type : 2-Stroke, Single Cylinder, Air-Cooled Petrol
- Auger Bit Size : 6-Inch Double Spiral Bit
- Fuel Tank Capacity : 1200 ml
- Fuel Mix Ratio : 1:40 (2T Oil : Petrol)
- Total Weight : 15 kg
- Cooling Method : Forced Air-Cooled
- Primary Utility : Agricultural Plantation, Fencing & Earth Boring
Description
The X1 POWER X1-EA70 Petrol Earth Auger provides high-torque digging performance engineered for commercial agriculture, plantation management, fencing installation, and civil site preparation. Driven by an aggressive 70cc 2-stroke air-cooled petrol engine delivering 3.5 HP (approximately 2.6 kW) at 7500 RPM, this machine supplies the mechanical torque required to bore through compacted dirt, hard dry soils, clay, and ground interwoven with fibrous root systems without stalling. Equipped with a reinforced 6-inch double spiral auger bit, the unit accelerates pit excavation. The dual-flight spiral geometry continuously pulls displaced earth upward and out of the cavity as the drill advances, leaving clean, uniform, vertical holes with minimal loose fallback. Its large 1200 ml fuel tank supports long working sessions across expansive farm acreage or long fence lines. Operating on a 1:40 2-stroke engine oil-to-petrol mixture and weighing a well-balanced 15 kg, the X1 POWER X1-EA70 balances aggressive engine power with operator control and stability.
Features
:- 70cc High Torque 2-Stroke Engine: Generates 3.5 HP (2.6 kW) at 7500 RPM to power through tough soil strata and root resistance.
- 6-Inch Double Spiral Auger Bit: Dual-flight flute design clears excavated soil out of the hole rapidly to prevent bit binding.
- 1200 ml High Capacity Fuel Tank: Enables long continuous drilling runs without the interruption of frequent refueling.
- Optimized 1:40 Pre-Mix Lubrication: Keeps piston rings, bearings, and cylinder walls protected against thermal wear under load.
- Rigid 15 kg Structural Frame: Balances weight distribution to help absorb rotational torque and reduce operator fatigue.
- Forced Air Cooling Architecture: High-surface-area cylinder cooling fins prevent thermal fade during extended high-RPM drilling.
Applications
:- Commercial Tree Plantations: Rapidly digs uniform pits for horticultural crops, fruit orchards, teak, rubber trees, and agroforestry saplings.
- Fencing Post Installations: Bores deep, straight holes for agricultural boundary fencing, security chain links, barbed wire posts, and solar park perimeter posts.
- Agricultural & Greenhouse Construction: Excavates anchor points and foundation post cavities for polyhouses, shade nets, and crop trellis supports.
- Landscaping & Urban Forestry: Prepares roadside tree planting pits, park shrubbery holes, and soil aeration channels across commercial estates.
- Civil & Utility Post Placements: Bores ground foundation sockets for directional signboards, rural streetlights, and temporary job-site barricade poles.
Ask AI
AI-generated answers may be inaccurate. Double-check critical facts. Questions & Answers (0)
Select attribute
