- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: KisanKraft
Kisankraft KK-PPDE-71, One Man Operated, 2-stroke, 71 cc Earth Auger | Post Hole Digger with 10 inch Auger Bit
SKU: PDA224
₹24250 (Including GST)
Get extra ₹364 Discount (On Checkout)
Delivery By: May 6 - May 8
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
Kisankraft KK-PPDE-71, One Man Operated Earth Auger
71-cc Engine Displacement
10 inch (25.4 cm) Bit Diameter
Country of origin: China
Description
Kisankraft Earth Auger is used for agriculture for digging holes in the soil. It makes holes for plantations or erecting poles. Digging soil with this machine is much easier and the process takes less time. Its machine comes in petrol with different sizes of bit. Hand Earth Auger can dig a hole up to 80 cm deep depending on the bit's diameter.
Features
:- Single man-operated earth auger
- Robust & highly efficient single speed gearbox
- Efficient utilization of time and manpower
- Low maintenance cost
Specification
:- Brand: KisanKraft
- Power : 3 hp
- Weight (Approx.) : 11.7 kg
- Fuel Used : Petrol
- Displacement : 71 cc
- Stroke : 2
- Model : KK-PPDE-71
- Bit Diameter : 10 inch (25.4 cm) (Approx.)
- Bit Length : 80 cm (Approx.)
- Engine Type : Air-cooled
- Fuel Used : Petrol
- Speed : 8500 RPM
- Fuel Tank Capacity : 0.8 Litre
- Fuel Consumption : 650 ml/hr
- Output Performance : 40-52 Pits/hr
Applications
:- To make pits for planting of seedlings.
- The machine is used for plantation purposes and used in agricultural land with sufficient moisture.
Usage
:Before you start:
> In a clean fuel container, mix 2T oil with petrol in the desired ratio (40 ML Oil in 1 Liter Petrol)
> Shake the container well to mix the fuel.
> Wear the necessary safety items like boots, gloves, etc for protection.
> Attach the appropriate auger bit for the desired hole size.
Starting the machine:
> Engage the choke lever on the carburetor to enrich the fuel mixture for easier starting.
> Pump the primer bulb several times to fill the fuel line with fuel.
> Mark the location where you want to drill the hole.
> Hold the throttle lever slightly open.
> Pull the starter cord firmly and consistently until the engine starts.
> Now, gently guide the auger bit into the ground, applying slight downward pressure to initiate drilling.
