support@toolsvilla.com
Become a Seller
Track Order
Brand: Husqvarna
Husqvarna 135 Mark II, 2.1 HP, 38-cc Petrol Chainsaw Machine with 16 inch Guide Bar
SKU: DP-BSC-200212
₹17490 (Including GST)
Get extra ₹262 Discount (On Checkout)
Delivery By: May 27 - May 29
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
2.1 HP Gas Chainsaw of 16 inch(40.64 cm) Bar
Maximum Power Speed is 9000 RPM
38cc Displacement
Country of origin: Sweden
Description
Features
:- The lightweight chainsaw is compact & maneuverable with excellent ergonomic comfort features.
- Exclusive X-torque Engine Reduces Both Fuel Consumption & Gasoline Emissions.
- Low vibration Anti-vibration System Reduces Vibration Levels for the Operator.
- Quick Release Air Filter for easy cleaning and replacement.
- Simple, side-mounted tensioning system allows for quick while working.
- Automatic oiler delivers a steady supply of chain lubricant for safe and effective use.
Specification
:- Brand: Husqvarna
- Power : 2.1 hp
- Fuel Used : Petrol
- Displacement : 38 cc
- Stroke : 2
- Weight (Approx.) : 7 kg
- Model No. : 135 Mark II
- Power Output : 2.1 HP
- Displacement : 38-cc
- Maximum Power Speed : 9000 RPM
- Idling Speed : 3000 RPM
- Fuel Consumption : 725 g/kWh
- Oil Pump Type : Automatic
- Bar Length : 16 inches (40.64 cm) Approx.
- Chain Gauge : 0.050 inch (0.127 cm) Approx.
- Oil tank volume : 0.26 Litre
- Weight : 7.2 Kg (Approx.)
Applications
:- Used for cutting trees, bamboos, wodds, etc.
Usage
:Before you start :
> Check the petrol (fuel) supply and add petrol if required.
> Take all the necessary safety precautions.
Starting the engine :
> Check the chain brake and engage it so that the chain don't move while operating.
> Turn the on/off switch to the "on" position and open the choke.
> Press the fuel primer button several times to fill the fuel from the tank into the carburetor.
> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.
> Adjust the choke to the “run” position once the engine is running.
> Allow the engine to be idle for about a minute to get warm and start working.
> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.
