Metro Safety Class L Full Body Fall Arrest Harness with 40mm PP/Nylon Webbing and IS 3521 Certification (SB 1105)

• Model: SB 1105
• Harness Class: Class L (Fall Arrest & Guided Vertical Attachment Specific)
• Webbing Material: High-Tensile Polypropylene (PP) / Nylon Compound
• Webbing Width: 40 mm
• Webbing Thickness: 3 mm
• Attachment Components: 1 x Rear Back Dorsal D-Ring, 2 x Front Chest D-Rings
• Adjustment Modules: Fully adjustable waist strap and adjustable shoulder straps
• Product Series: Metro eco line
• Safety Certification: Conforms to IS 3521 (IS Marked)

Features

• Class L Multi-Anchor Layout: Explicitly engineered as a Class L system, integrating 1 heavy-duty back dorsal D-ring for primary fall arrest alongside 2 front-mounted chest D-rings for guided vertical tracking or ladder climbing lifelines.
• IS 3521 Certified Compliance: Manufactured to meet rigid Indian Standard parameters, carrying an authentic and official IS Mark validation for industrial safety regulatory checks.
• Heavy-Duty Webbing Architecture: Built entirely out of industrial-grade PP (Polypropylene) or Nylon fibers measuring 40 mm in width and 3 mm in thickness to deliver premium breaking strength.
• Fully Adjustable Strap Geometry: Designed with highly customizable, independent adjustable waist and shoulder straps to ensure a snug, close-to-body fit over varying work apparel layers.
• Metro Eco Production Line: Part of the cost-effective and highly reliable "Metro eco" series, offering dependable, trade-quality fall protection safety without excessive, unnecessary bulk.
• High-Visibility Stripe Accents: Bold orange and red contrast color arrangement significantly boosts worker tracking and visibility around moving crane hardware or low-light work areas.
• Friction Lock Metal Hardware: Outfitted with robust steel pass-through adjustment buckles that lock webbing parameters securely, preventing slippage or loosening during repetitive movements.

Applications

• Vertical Ladder & Tower Climbing: Sternal front dual D-rings connect perfectly to cable or rope-guided travelers when climbing telecommunication towers, cell pylons, and wind turbine ladders.
• High-Rise Structural Construction: Mandatory fall prevention gear for ironworkers, scaffolding crews, and structural cement masons working near open building edges.
• Electrical Utility Line Maintenance: Highly secure body restraint anchoring for power grid technicians servicing overhead substations or high-tension wire poles.
• Commercial Roofing & Cladding Setup: Essential protection during industrial steel roof shed installations, solar panel alignments, and exterior fascia trim placement.

Usage

• Thoroughly inspect all 40mm webbing paths, the 3mm structural thickness, all three steel D-rings, adjusting buckles, and structural stitch points for any cuts, burns, fraying, or chemical contamination before starting work.
• Lift the harness cleanly by its rear back D-ring, shaking it out gently to let the orange and red shoulder, waist, and leg straps fall free into their intended spatial orientation.
• Guide your arms through the shoulder loops exactly like putting on a standard jacket or vest, ensuring the rear D-ring rests flatly between your shoulder blades and the two front D-rings settle symmetrically over your chest.
• Connect the waist strap firmly through its designated pass-through steel friction buckle, pulling it until a close, snug fit is established around your core.
• Pull the independent leg loops up between your thighs, secure them tightly using their respective metal adjustment modules, and adjust until the straps are firm but allow a flat hand to comfortably slide beneath.
• Align the shoulder adjustments to settle the webbing securely across your collarbones, tucking any residual webbing tails cleanly into the integrated keepers.
• Securely latch a certified, shock-absorbing lanyard to the rear back D-ring for standard fall arrest, or clip your vertical rope-grab/cable-traveler system directly to the front dual D-rings before starting your vertical ascent.