ZPremium XG 279 Soft Semi Fluid Heavy Duty Lubricating Grease for Open Gears & Centralized Systems 18 KG Bucket

• Product Name: Grease XG 279
• Form: Semi-Fluid Grease
• Thickener Type: Lithium / Calcium Soap
• Base Oil Type: Mineral / Synthetic Oil
• Consistency Grade: Soft (Peanut butter / Toothpaste consistency)
• Additive Types: Anti-Wear, Rust Inhibitors, Oxidation Inhibitors

Applications

• Centralized and automated lubrication distribution networks on heavy machinery.
• Industrial open gear assemblies and small high-load gearbox systems.
• High-precision rolling element bearings and sensitive electric motor drives.
• Heavy duty sliding mechanical components operating in marine and mining setups.
• Food and beverage production machinery where NSF H1 machinery lubricant compliance is mandatory.

Features

• Formulated with a soft semi-fluid consistency for effective distribution in centralized automatic lubrication systems.
• Blended with high-grade base oils and lithium/calcium soap thickeners for optimal temperature stability.
• Enhanced with advanced anti-wear agents to reduce friction and extend component service life.
• Built-in rust and corrosion inhibitors protect metal surfaces exposed to harsh moisture and outdoor environments.
• High oxidation resistance prevents sludge formation and maintains consistency under continuous operation.
• Suitable for NSF H1 applications where accidental contact with food or beverages may occur.

Accessories

Usage

• Clean all application points thoroughly to remove existing degraded grease or dirt contaminants before filling.
• Charge or pump directly into centralized automatic lubrication system reservoirs for automated distribution.
• Inspect grease feed lines regularly to verify uniform distribution to all targeted bearing surfaces.
• Ensure container lids are tightly closed after every use to avoid dust or humidity contamination.
• Store bucket upright in a cool, dry, clean indoor location out of direct sunlight.
• Regularly clean outer surfaces of system dispensing nozzles to prevent particulate ingress into machine bearings.
• Routinely check central pump lines for pressure drops or air locks to preserve continuous fluid supply.