• Cooling Type : Air-cooled
• Bit Length : 80 cm (Approx.)
• Auger bit Width : 10 inch (25.4 cm ) Approx
• No. of Load Speed: 9500 RPM
• Engine Type: Single Cylinder
• Oil mixing : 40ml (2T) oil/1L of Petrol
• Fuel Tank Capacity : 1.5 liter
• Ignition: C.D.I
• Fuel Consumption: 600 ml/hr (Approx.)
• Digging Capacity : 80-100 Holes per 1 liter Petrol (Approx.)

Features

• Excellent Digging Capability
• Easy to Operate & Maintain
• Ergonomic handle, comfortable grip, balanced operation.
• Manual recoil starter for reliable ignition.

Accessories

• Auger bit : 10 inch ( 25.4 cm ) Approx
• Toolkit
• User Manual

Applications

• Drilling holes for fencing posts.
• Plantation and tree sapling pits.
• Gardening, landscaping, and drip irrigation set-up.
• Suitable for agricultural, horticultural, and construction sites.
• Used by farmers, fencing contractors, and landscapers.

Usage

•       > In a clean fuel container, mix 2T oil with petrol in the desired ratio (40 ML Oil in 1 Liter Petrol) 
•       > Shake the container well to mix the fuel.
•       > Wear the necessary safety items like boots, gloves, etc for protection.
•       > Attach the appropriate auger bit for the desired hole size.
• Starting the machine:
•       > Engage the choke lever on the carburetor to enrich the fuel mixture for easier starting. 
•       > Pump the primer bulb several times to fill the fuel line with fuel. 
•       > Mark the location where you want to drill the hole. 
•       > Hold the throttle lever slightly open. 
•       > Pull the starter cord firmly and consistently until the engine starts.
•       > Now, gently guide the auger bit into the ground, applying slight downward pressure to initiate drilling.