- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: Stihl
Stihl MS 180, 31.8-cc Petrol Chainsaw with 18 inch Guide Bar
SKU: RON-CS-001
₹18450 (Including GST)
Get extra ₹277 Discount (On Checkout)
Delivery By: May 5 - May 7
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
Stihl MS 180, 31.8-cc Petrol Chainsaw
18-inch (45.72 cm) Guide Bar
Country of origin: Germany
Description
The MS-180 Stihl petrol chainsaw gets back to basics with improved engine airflow and shroud design. With its improved design comes enhanced engine cooling and air filtration, giving you more consistent performance in the field. Make quick work of trimming branches, cutting small trees and clearing fallen limbs after a storm. If you’re looking for a reliable, light-duty chainsaw for occasional use, the MS 180 is a value you can’t ignore.
Features
:- Attractive Design
- Highly Efficient Product
- Excellent Cutting Capability
Specification
:- Brand: Stihl
- Power : 1.5 kw
- Fuel Used : Petrol
- Displacement : 32 cc
- Stroke : 2
- Weight (Approx.) : 7 kg
- Model No. : MS 180
- Power Output : 1.5kW
- Engine Displacement : 31.8-cc
- Bar Length : 18 inch ( 45.72 cm) (Approx.)
- Guide Bar Length : 40.64 cm
- Engine Type : 2 stroke
- Fuel Tank Capacity : 700 ml (Approx.)
- Chain Pitch : 0.404 inch (1.026 cm) Approx.
- Chain Gauge : 1.5 mm
- Power Source : Fuel
- Fuel Used : Petrol
- Weight : 7 Kg (Approx.)
Applications
:- Stihl MS 180 Petrol Chainsaw is highly suitable for tree pruning and cutting firewood. Good for felling trees up to approx. 30 cm in diameter.
Usage
:Before you start :
> Check the petrol (fuel) supply and add petrol if required.
> Take all the necessary safety precautions.
Starting the engine :
> Check the chain brake and engage it so that the chain don't move while operating.
> Turn the on/off switch to the "on" position and open the choke.
> Press the fuel primer button several times to fill the fuel from the tank into the carburetor.
> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.
> Adjust the choke to the “run” position once the engine is running.
> Allow the engine to be idle for about a minute to get warm and start working.
> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.
