with 10 inch Auger Bit
Brand : MECSTROKE
MECSTROKE 63-cc, 2-stroke Trolley Type Earth Auger / Post hole digger Machine with 10 inch Auger Bit
SKU : DK-KA-2102
MRP :
₹27500
-
1
+




Easy Return
& Refund
& Refund

Quality
Assurance
Assurance

Trusted
Delivery
Delivery

After Sales
Assistance
Assistance

Buyer
Protection
Protection
Short Description
MECSTROKE 63-cc, 2-stroke Trolley Type Earth Auger / Post hole digger Machine
Country of origin: China
- Brand: MECSTROKE
- Weight (Approx.) : 41 kg
- Product Type : Earth Auger
- Brand : MECSTROKE
- Engine Type : Single Cylinder, 2-stroke,
- Cooling Type : Air-cooled
- Fuel Used : Petrol engine
- Displacement : 63-cc
- Power : 1.7 kw (2 HP)
- Engine Speed : 15000 RPM
- Oil mixing : 40 ml (2T) oil/ 1L of Petrol
- Fuel Tank Capacity : 1.25 L
- Ignition : C.D.I
- Fuel Consumption : 550 ml/hr (Approx.)
- Bit Length : 80 cm (Approx.)
- Bit Diameter : 10 inch (25.4 cm) (Approx.)
Note : This machine comes with a free auger bit having 80 cm (Approx.) length and 10-inch (25.4 cm)
The MECSTROKE 63-cc, 2-stroke Trolley Type Earth Auger / Post hole digger Machine with 10 inch Auger Bit is a heavy-duty and efficient machine to dig holes in the ground. Having a trolley-type design, this earth auger can be operated easily and smoothly. With its 80 cm long auger bit and 10-inch (25.4 cm) bit diameter, you can dig big potholes in different types of ground with ease. Invest in the MECSTROKE trolley-type earth auger and make your digging job easy.
Features
:- Trolley Type Earth Auger for Easy Handling
- Sturdy Design
- Fuel Efficient Engine
- Excellent Digging Capability
Applications
:- Used for digging holes in ground, hard ice, etc.
Usage
:Before you start:
> Check the fuel level and add fuel if necessary.
> Attach the desired auger bit to the shaft and ensure it is fastened properly.
> Wear the necessary safety items like boots, gloves, etc for protection.
Starting the machine:
> Set the choke to the "ON" position.
> Prime the engine by pumping the primer bulb until fuel is visible in the line.
> Place the auger bit at the desired drilling location.
> Hold the throttle lever slightly open.
> Grip the starter cord and pull it firmly to start the engine.
> Once the engine starts, gradually release the choke.
> Adjust the throttle as needed to maintain the desired drilling speed.
> Slowly engage the auger into the ground, allowing the machine's weight to do most of the work.

Select attribute
