Single & Three Phase Self Start Welder and Petrol Generator 200 Amps

Easy Returns

Quality Assurance

Trusted Delivery

After Sales Assistance

Short Description

Single & Three Phase

2.6 mm to 4.0 mm Electrode Diameter (Maximum) 

Description

Single & Three Phase Self Start Welder and Petrol Generator 200 Amps

Specification:

• Model No.: GE-3P-W8000RS
• Product Type: Welder Generator
• Brand: HPM
• Maximum Output (Duty Cycle 60%): 200 Amps.
• Working Voltage: 20v to 35 v
• Open Circuit Voltage: 70 Volt (Maximum)
• Current Regulation Amps: 40-200
• Rectifying Mode: SCR, Phase Controlled 3phase, Rectifying Bridge
• Maximum Electrode Diameter: 2.6 mm to 4.0 mm
• Type: Brushless with Rear Earth Magnet Rotor.
• Maximum AC Output (3 Phase): 5000 VA
• Rated AC Output (3 Phase): 4500 VA
• Circuit Breaker (3 Phase): 6.5 Amps
• AC Voltage (3 Phase): 415 Volts ± 10 Volts, Three Phase
• Maximum AC Output (Single Phase): 3000 VA
• Rated AC Output (Single Phase): 2500 VA
• Auxillary AC Voltage (Single Phase): 240 Volts ± 10 Volts, Single Phase
• Rated Current (Single Phase): 12 Amps
• Circuit Breaker (Single Phase): 12 Amps
• Frequency: 50 to 60 Hz.
• Class of Insulation: F
• Engine Model: HM192P
• Engine Type: Single Cylinder Air-cooled; 4- stroke, OHV 25˚ Inclined
• Maximum Power: 16HP
• Bore x Stroke: 92×67
• Displacement: 460cc
• Starting System: Recoil Start / Self Start
• Ignition System: TCI (Transistor Control Ignition)
• Fuel: Petrol
• Fuel Tank Capacity: 15.5 Liters
• Fuel Consumption Ltr./Hr.: 2.0 Ltr./hr.
• Continuous Operating Hour: Approx. 8 hr.
• Lube. Oil Capacity: 1200 ml.
• Lubricating Oil Consumption: 4.3 gm./Hr.
• A.C. Circuit Protector: Yes
• A C. Pilot Lamp Yes
• Engine Oil Protection: Electronic Oil Alert & Indicator
• Fuel Level Gauge: Yes
• A.C. Output Sockets: 1 Nos.
• Dimension LxWxH (mm): 660 x 500 x 575 mm
• Battery Specification: 12 Volt 25 Ah Size = 190×120×225 (L×W×H)
• Weight (Kgs.): 95 Kgs.

Accessories:

• AC Plug
• Tool Kit
• Welder Holder
• Earthing Clamp with 3 Mtr. Cable
• Oil Funnel
• Battery Terminal
• Battery Tray & Holding Set
• Manual Book

Note :

• Do not use the welder for work other than welding.
• Do not touch the live part. 
• Do not solder in places where skimming, cleaning and spraying are required.
• When using, please wear a protective cover or protective clothing.

Question & Answer (0)

ASK QUESTION

Your question *

Mobile Number *

Email

SUBMIT QUERY

Reviews (0)

Product Image Gallery