- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
<
>
JPG)
gif)
Brand: Canfly
Canfly X5, 58-cc, Petrol Chainsaw with 18 inch Guide Bar | Ideal for Cutting Tree, Logging Woods, and Gardening
SKU: SAC-CS-1050
Delivery By: Jun 26 - Jun 28 
MRP : ₹8650
Delivery By: Jun 26 - Jun 28 Easy Return
& Refund
& Refund
Quality
Assurance
Assurance
Trusted
Delivery
Delivery
After Sales
Assistance
Assistance
Buyer
Protection
Protection
₹8650 (Including GST)
Get Extra ₹130 OFF on Prepaid Orders
QTY :
-
1
+
Short Description
Canfly X5, 58-cc, Petrol Chainsaw
2-stroke, Air Cooled
18 Inch (45.72 cm) Guide Bar
Country of origin: China
Specifications
- Brand: Canfly
- Power : 2.5 kw
- Weight (Approx.) : 7 kg
- Fuel Used : Petrol
- Displacement : 58 cc
- Stroke : 2
- Model Number: X5
- Power Type : Petrol
- Engine Feature : 2-Stroke, Forced Air Cooling, Single Cylinder
- Displacement : 58-cc
- Guide Bar Length : 18 inch (45.72 cm) (Approx.)
- Rated Output Power : 2.5 kw (3.3 HP)
- Idle Speed : 2800-3300 r/min
- Fuel Tank Capacity : 550 ml
- Fuel Consumption : 1200 ml/hr (Approx.)
- RPM : 8800
Description
Excellent for cutting firewood with improved cutting performance. Optimum ergonomics for effortless working, Quickstop Super chain brake, the saw chain immediately comes to a stop when releasing the rear handle, soft handle for a good grip and comfortable working.
Features
:- 2-Stroke
- Forced Air Cooling
- Single Cylinder
Applications
:- Used for cutting tree, wood, firewood, etc.
Usage
:Before you start :
> Check the petrol (fuel) supply and add petrol if required.
> Take all the necessary safety precautions.
Starting the engine :
> Check the chain brake and engage it so that the chain don't move while operating.
> Turn the on/off switch to the "on" position and open the choke.
> Press the fuel primer button several times to fill the fuel from the tank into the carburetor.
> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.
> Adjust the choke to the “run” position once the engine is running.
> Allow the engine to be idle for about a minute to get warm and start working.
> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.
