This sprayer has a 16 lit. capacity high density polyethylene tank with pressure chamber and pump fitted outside the tank with 2 nos. adjustable shoulder straps without cushions complete with 110 cm long delivery hose and spray lance VMND consisting of trigger cut off, 60 cm long extension rod one end bend as gooseneck and duro mist spray nozzle with stainless steel disc and 1 set of packing gaskets, conforming to IS specification and with ISI mark.
Features
:- Ergonomically designed rest comfortably on operator’s back.
- Develops sufficient and continuous pressure.
- Pump is centrally blocked and easy for operation as balance is perfectly maintained.
- Frame directly moulded to the tank.
- Bigger faller hole with strainer allows filling spray solution without spilling.
Applications
:- Suitable for spraying on field crops and plantations
Usage
:Before you start :
- Read the Manual properly and Wear Personal Protective Equipment.
- Fill the Tank and tighten the cap securely to prevent leaks during use
Starting the machine:
- Pump the Handle: Operate the pump handle 8-10 times to build pressure in the tank. This action draws liquid into the pump chamber
- Adjust the nozzle and Squeeze the trigger handle to start spraying. Maintain pressure on the trigger until you achieve your desired flow rate.
- Maintain Pressure, continue pumping the handle as needed to keep up pressure while spraying.
After Use:
- Clean the Sprayer: Rinse out any remaining solution with clean water to prevent clogs and damage.
- Store Properly: Store your sprayer in a cool, dry place away from direct sunlight and chemicals.