- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: Generic (Imported)
Heavy Duty 63-cc Earth Auger Engine with 203.2 mm (8 inch) Drill Bit | Post Hole Digger | Soil Drilling Machine
SKU: DK-KA-2100
₹8800 (Including GST)
MRP : ₹12000
Get extra ₹132 Discount (On Checkout)
Delivery By: May 17 - May 19
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
63-cc Earth Auger Machine
8-inch (20.32 cm) Bit Diameter
Country of origin: China
Description
Earth Auger is used in agriculture for digging holes in the soil. It makes holes for plantations or for erecting poles. It is much easier to dig soil with this machine and the process takes less time. This machine comes with a petrol engine. This Earth Auger can dig a hole up to 80 cm deep, depending on the diameter of the bit.
Features
:- Easy to Maintain & Operate
- Excellent Digging Capability
- Heavy Duty Build Quality
Specification
:- Brand: Generic (Imported)
- Power : 2.3 kw
- Weight (Approx.) : 12.7 kg
- Fuel Used : Petrol
- Displacement : 63 cc
- Stroke : 2
- Engine Type: Single Cylinder
- Cooling Type: Air-cooled
- Fuel Used: Petrol engine
- No. of Load speed: 9500 RPM
- Bit Length : 80 cm (Approx.)
- Bit Diameter : 8-inch (20.32 cm) (Approx.)
- Oil mixing: 40 ml (2T) oil/1L of Petrol
- Fuel Tank Capacity: 1.5 liter
- Ignition: C.D.I
- Fuel Consumption: 600 ml/hr (Approx.)
- Digging Capacity : 80-100 Holes per 1 liter Petrol
Note : This machine comes with an 8-inch (20.32 cm) free auger bit.
Accessories
:- 8-inch (20.32 cm) Auger Bit
- Guide Manual
- Toolkit
- Oil Mixing Can
Applications
:- Used for digging holes in different kind of soil
Usage
:Before you start:
> In a clean fuel container, mix 2T oil with petrol in the desired ratio (40 ML Oil in 1 Liter Petrol)
> Shake the container well to mix the fuel.
> Wear the necessary safety items like boots, gloves, etc for protection.
> Attach the appropriate auger bit for the desired hole size.
Starting the machine:
> Engage the choke lever on the carburetor to enrich the fuel mixture for easier starting.
> Pump the primer bulb several times to fill the fuel line with fuel.
> Mark the location where you want to drill the hole.
> Hold the throttle lever slightly open.
> Pull the starter cord firmly and consistently until the engine starts.
> Now, gently guide the auger bit into the ground, applying slight downward pressure to initiate drilling.
