- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: Husqvarna
Husqvarna 445E II, 45.7-cc, 2.8 HP Petrol Chainsaw with 18 inch Guide Bar
SKU: RB32
₹27990 (Including GST)
MRP : ₹29000
Get extra ₹420 Discount (On Checkout)
Delivery By: May 14 - May 16
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
Husqvarna 445E II, 2.8 HP, 45.7-cc Petrol Chainsaw
18 inch (45.72 cm) bar length
Country of origin: Sweden
Description
The 45-cc Husqvarna 445E II, 2.8 HP Petrol Chainsaw is a lightweight, powerful chainsaw with Smart Start technology. For those who appreciate professional capabilities in a saw, this second generation powerful all-around saw is ideal. comes with flip-up tank caps, a thinner saw body, and an easy-to-start slower pull. Lower emissions and fuel consumption are associated with the X-Torq engine. The saw is easier to manage. Thanks to its visible fuel level and auto return stop switch. equipped with a fuel pump and Smart Start for effortless starting.
Features
:- Air Injection Technology
- Powerful and Efficient X-TORQ Engine
- Easy to start
- Flip-Up Fuel Cap
- Quick-Release Air Filter
- Smart Start Technology
- Felling Marks
- Combined Choke/Stop Control
- Snap-Lock Cylinder Cover
- Three-Piece Crankshaft
- Low Vibration Technology
- Inertia-Activated Chain Brake
- Fuel Indicator
Specification
:- Brand: Husqvarna
- Power : 2.8 hp
- Weight (Approx.) : 4.86 kg
- Fuel Used : Petrol
- Displacement : 45.7 cc
- Stroke : 2
- Model No : 445E II
- Power : 2.8 HP (2.1 KW)
- Displacement : 45.7-cc
- Bar Length : 18 inch (45.72 cm) Approx.
- Chain Pitch : 0.325 inch (0.8255 cm) Approx.
- Weight : 4.86 Kg (Approx.)
Applications
:- Used for cutting/felling tree, logging wood, cutting firewood, bamboo, etc.
Usage
:Before you start :
> Check the petrol (fuel) supply and add petrol if required.
> Take all the necessary safety precautions.
Starting the engine :
> Check the chain brake and engage it so that the chain don't move while operating.
> Turn the on/off switch to the "on" position and open the choke.
> Press the fuel primer button several times to fill the fuel from the tank into the carburetor.
> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.
> Adjust the choke to the “run” position once the engine is running.
> Allow the engine to be idle for about a minute to get warm and start working.
> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.
