- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: Husqvarna
Husqvarna 272XP, 72.2-cc Petrol Chainsaw with 24 inch Guide Bar
SKU: AB-HV-200603
₹40500 (Including GST)
Get extra ₹608 Discount (On Checkout)
Delivery By: May 14 - May 16
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
Husqvarna 272 XP Chainsaw
24inch(60.96 cm Approx.)Guide Bar
72.2 cc Displacement
Country of origin: Sweden
Description
This professional saw is designed for highly demanding conditions where efficiency is of prime importance. Based on professionally proven Husqvarna technology, it combines high power, low weight and rapid acceleration. Equipped with a three-piece crankshaft and magnesium crankcase, the 272 XP is highly reliable. Ease of use is ensured by features such as Smart Start, adjustable oil pump and angled front handle.
Features
:- Adjustable Oil Pump : Adjustable Oil Pump makes it easy to set the chain lubrication according to your needs.
- Magnesium Crankcase : Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.
- Three-piece crankshaft : Forged three-piece crankshaft for maximum durability for the toughest applications.
- Low Vibration : Effective anti-vibration dampeners absorb vibration, sparing the user's arms and hands.
Specification
:- Brand: Husqvarna
- Power : 3.6 kw
- Fuel Used : Petrol
- Displacement : 72.2 cc
- Stroke : 2
- Model No. : 272 XP
- Power Output : 3.6 kW
- Cylinder Displacement : 72.2 cc
- Maximum Power Speed : 9300 RPM
- Fuel Consumption : 506 g/kWh
- Oil Pump Type : Automatic
- Bar Length : 24 inch (60.96 cm Approx.)
- Chain Type : H42
- Oil Tank Volume : 0.4 L
- Weight : 6.3 kg (Approx.)
Applications
:- Used for logging woods, cutting trees, tree branches, bamboos, woods, etc.
Usage
:Before you start :
> Check the petrol (fuel) supply and add petrol if required.
> Take all the necessary safety precautions.
Starting the engine :
> Check the chain brake and engage it so that the chain don't move while operating.
> Turn the on/off switch to the "on" position and open the choke.
> Press the fuel primer button several times to fill the fuel from the tank into the carburetor.
> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.
> Adjust the choke to the “run” position once the engine is running.
> Allow the engine to be idle for about a minute to get warm and start working.
> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.
