- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: KisanKraft
Kisankraft KK-PPDE-62, 62-cc One Man Operated Earth Auger / Post hole digger with 12 inch Bit
SKU: SS-AR-792
₹21500 (Including GST)
MRP : ₹25000
Get extra ₹323 Discount (On Checkout)
Delivery By: May 31 - Jun 2
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
Kisankraft KK-PPDE-62, 62-cc One Man Operated Earth Auger / Post hole digger
with 12 inch Bit
Country of origin: China
Description
Kisankraft KK-PPDE-62, 62-cc One Man Operated Earth Auger / Post hole digger with 12 inch Bit is used in agriculture for digging holes in the soil. It makes holes for plantation or for erecting poles. It is much easier to dig soil with this machine and the process takes less time. Its machine comes in petrol with different sizes of bits. Hand Earth Auger can dig a hole up to 80 cm deep, depending on the diameter of the bit.
Features
:- Premium Quality
- Sturdy Design
- Easy to Use & Maintain
- Excellent Digging Capability
Specification
:- Brand: KisanKraft
- Power : 2.7 hp
- Weight (Approx.) : 10 kg
- Fuel Used : Petrol
- Displacement : 62 cc
- Stroke : 2
- Model : KK-PPDE-62
- Engine Type : Air-cooled
- Speed : 10000 RPM
- Engine idling speed : 3000 ± 300 RPM
- Fuel Mixture (Petrol : Oil) : 25 : 1
- Fuel Tank Capacity : 1200 ml
- Starter : Recoil
- Bit Diameter : 12 inch (30.48 cm) (Approx.)
- Bit Length : 80 cm (Approx.)
- Gear box lubricant : Gear oil SAE#80-90
Applications
:- To make pits for planting of seedlings. The machine is used for plantation purpose and used in agricultural land with sufficient moisture.
Usage
:Before you start:
> In a clean fuel container, mix 2T oil with petrol in the desired ratio (40 ML Oil in 1 Liter Petrol)
> Shake the container well to mix the fuel.
> Wear the necessary safety items like boots, gloves, etc for protection.
> Attach the appropriate auger bit for the desired hole size.
Starting the machine:
> Engage the choke lever on the carburetor to enrich the fuel mixture for easier starting.
> Pump the primer bulb several times to fill the fuel line with fuel.
> Mark the location where you want to drill the hole.
> Hold the throttle lever slightly open.
> Pull the starter cord firmly and consistently until the engine starts.
> Now, gently guide the auger bit into the ground, applying slight downward pressure to initiate drilling.
