- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: MAKITA
Makita EA6100P45E, 60.7-cc, Petrol Chainsaw with 18 inch Guide Bar | Ideal for Cutting Tree, Firewood and Landscaping
SKU: BP-MP-002-ss
₹76500 (Including GST)
Get extra ₹1,148 Discount (On Checkout)
Delivery By: May 20 - May 22
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
Makita EA6100P45E, 60.7-cc, Petrol Chainsaw
18-inch (45.72 cm) Guide Bar Length
Country of origin: Japan
Description
Long Lasting durable petrol chainsaw from Makita. Invest in this chainsaw machine and make your cutting job easy & smooth.
Features
:- Low-vibration system with damper springs to absorb vibration from engine to integrated front and rear handles.
- Enhanced air filtration; centrifugal separation system effectively removes dust particles away from intake air and reduces dust stuck on the filter.
- Easy start-up with spring-assisted recoil starter reduces user’s fatigue by the drastic reduction of resistance caused when the starter rope is pulled.
Specification
:- Brand: MAKITA
- Power : 3.4 kw
- Weight (Approx.) : 6
- Fuel Used : Petrol
- Displacement : 60.7 cc
- Stroke : 2
- Model No : EA6100P45E
- Oil Tank Capacity : 480 mL
- Saw chain : Pitch : 0.325 or 3/8" (0.9525 cm)
- Gauge : 1.5mm (0.058")
- Guide Bar Length : 18 inch (450 mm) (Approx.)
- Engine Power: 3.4kW / 4.6PS
- Fuel Tank Capacity : 0.8 liter
- Chain oil tank : 0.48L
- Vibration level Front handle : 5.0m/s²
- Vibration level Rear handle : 4.0m/s²
Accessories
:- Chain blade
- Guide bar cover
- Wrenches
Applications
:- Used for felling/cutting trees, logging woods, cutting bamboos, etc.
Usage
:Before you start :
> Check the petrol (fuel) supply and add petrol if required.
> Take all the necessary safety precautions.
Starting the engine :
> Check the chain brake and engage it so that the chain don't move while operating.
> Turn the on/off switch to the "on" position and open the choke.
> Press the fuel primer button several times to fill the fuel from the tank into the carburetor.
> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.
> Adjust the choke to the “run” position once the engine is running.
> Allow the engine to be idle for about a minute to get warm and start working.
> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.
