Quantity 2.25 Kg
Brand : Generic ( Made in India )
Akemi 2.25 Kg Akepox 5010 Komponente A and B
SKU : TI-A2-23684
MRP : ₹17200
₹13650
21% OFF!
-
1
+
661 people have viewed this recently 
Delivery By: Sep 23 - Sep 25 
Easy Return
& Refund
& Refund
Quality
Assurance
Assurance
Trusted
Delivery
Delivery
After Sales
Assistance
Assistance
Buyer
Protection
Protection
Short Description
Akemi Akepox 5010 Komponente A and B
Country of origin: India
Specification
- Brand: Generic ( Made in India )
- Weight (Approx.) : 2.25 kg
- Specific Uses For Product : Concrete
- Material : Stone
- Item Form : Paste
- Model no. : Akepok 5010
- Included components : Akepox 5010 Komponente A & Komponente B
- Storage : If stored in dry and cool condition (5-25°C/41-77°F) in its closed original container at least 24 months from production.
- Health & Safety : Read Safety Data Sheet before handling or using this product.
Instructions of use :
A. Products in Cans
- Thoroughly clean and roughen the surfaces to be bonded.
- Thoroughly combine 2 parts (volume or weight) of component A and 1 part (volume or weight) of component B until a uniform shade of color is attained.
- Akepok colouring pastes or concentrates can be added at a maximum of 5%.
- The combination is workable for around 20-30 minutes (20°C). The bonded pieces can be moved after approximately 6-8 hours (20°C), and after 12-16 hours (20°C), they can be processed further. Maximum stability after 7 days at 20°C.
- Tools can be cleaned using Akemi nitro-dilution.
- Heat accelerates the hardening process, while cold delays it.
B. Cartridge System
- Thoroughly clean and roughen the surfaces to be bonded thoroughly.
- Remove the clasp from the cartridge and insert it into the cannon, work the grip until material emerges from both apertures, then screw up the mixing nozzle.
- Akepok colouring pastes or colouring concentrates can be applied up to 5%.
- When operating without a mixing nozzle, ensure that both components are thoroughly blended.
- The combination is usable for around 20-30 minutes (20°C). After approximately 6-8 hours (20°C), the bonded portions can be moved. They can be further treated after approximately 12-16 hours (20°C). Maximum stability after 7 days at 20°C.
- The tools can be cleaned with Akemi nitro-dilution.
- Heat accelerates the hardening process, while cold delays it.
Special notes :
- Suitable for bonding load-bearing building elements; nevertheless, the applicable requirements, such as DIN 18516 part 1 and part 3 or DIN 2304, must be followed during application.
- Only by maintaining the optimum mixing ratio can optimal mechanical and chemical qualities be achieved. A surplus of adhesive or hardener acts as a softener, causing discoloration in the marginal zone.
- Single mix cartridges are not appropriate for compressed-air weapons or those with mechanical pistons.
Description
Akemi 2.25 Kg Akepox 5010 Komponente A and B is a gel-like, solvent-free, two-component glue based on an epoxy resin with a cyclicaliphatic polyamine hardener.
Features
:- Neutral color
- Low yellowing tendency
- Easy dosage and mixing using cartridge system.
- High creeping strength because of the gel-like consistency.
- There is extremely little shrinking during the hardening process, so-low tension in the bonding layer.
- Weather-resistant bonding and easy coloration with Akepok Pastes or Concentrates.
- The adhesive has outstanding dimensional stability, minimal fatigue, and excellent alkali stability, making it ideal for bonding concrete.
- Ideal for bonding gases.-impermeable materials because it's a solvent.
- Suitable for bonding solvent-sensitive materials such as expanded polystyrene (ABS).
Questions & Answers (0)
Product Image Gallery
Select attribute
