A non-consumable tungsten electrode is used in the TIG (Tungsten Inert Gas) welding method to create the weld. To prevent ambient contamination of the weld region, an inert gas, usually argon, is used in the process. With a maximum output current of 300 amps, a 300 A TIG welding machine can be used for a variety of welding tasks, especially those involving thin materials and precision work.
Features :
- IGBT Inverter Technology.
- HF ARC Ignition
- AC Waveforms Square / Sine / Triangular
- Digital Ampere Meter
- Stepless Current Control
- Pre & Post Gas Flow Function
- Up & Down Slope Function
- Initial & Crater Current Selection
- Pulse Frequency Selection
- 2T / 4T Function
- AC Frequency Adjustment
- Compatible to Generator Supply
- IP21S Compliance
- Water Cooling Unit - Optional
Specifications :
- Model : TIG 315
- Input Power Supply : 400 V ±15%, 50/60 Hz
- Required Phase : 3 Phase
- Input Power : 13.8 KVA
- Output Range : 15-315
- Rated output : A315 A
- Duty Cycle : 60 %
- OCV (Open Circuit Voltage) : 75 V
- Suitable Electrode Holder : Tungsten Electrode Rod Upto 4 mm
Applications :
- Aerospace, Scaffolding, Ladders, Milk Can, Aluminum Fabrication, Bus Body.
Accessories :
- 3 m Earthing Cable with Clamp
- 4 m Air Cooled TIG Torch.
Note :
- Do not use the welder for work other than welding.
- Do not touch the live part.
- Do not solder in places where skimming, cleaning and spraying are required.
- When using, please wear a protective cover or protective clothing.