- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: Bluepoint
Bluepoint 3/8 Inch Tight Access Air Impact Wrench, 7500 RPM No Load Speed (AT4510)
SKU: TI-XP-46255
Delivery By: Dec 9 - Dec 11 
MRP : ₹16799 ₹13999
17% OFF!
Delivery By: Dec 9 - Dec 11 Easy Return
& Refund
& Refund
Quality
Assurance
Assurance
Trusted
Delivery
Delivery
After Sales
Assistance
Assistance
Buyer
Protection
Protection
₹13999 (Including GST)
MRP : ₹16799
17% OFF!
Get Extra ₹210 OFF on Prepaid Orders
QTY :
-
1
+
Short Description
Bluepoint 3/8 Inch Tight Access Air Impact Wrench
7500 RPM No Load Speed
Country of origin: China
Specifications
- Brand: Bluepoint
- Weight (Approx.) : 1.3 kg
- No-Load Speed : 7500 rpm
- Square Drive Size : 0.37
- Air Pressure : 6.3 bar
- Max. Torque : 345 nm
- Model No. : AT4510
- Blows per minute : 1300
- Air Consumption : 232 LPM
- Recommended Hose Size : 3/8 Inch
- Vibration Level : 4 m/s²
- Sound Level : 83 dBA
- Length : 112 mm
Description
Bluepoint AT4510 is a 3/8 inch tight‑access air impact wrench designed for powerful fastening and loosening in extremely confined spaces, combining a stubby body with high torque and a 7500 RPM no‑load speed. It delivers about 345 Nm of maximum torque with roughly 1300 blows per minute, making it suitable for professional automotive and industrial maintenance where access is limited.
Features
:- 345 Nm of torque, 7500 RPM and 1300 blows per minute
- Compact size allowing access to limited spaces
- Extreme lightweight design to reduce users’ fatigue
- Ergonomic designed grip delivering comfort when handling
- Twin hammer impact mechanism hits harder and delivers Increased tool longevity
- One handed forward/reverse switch for easy operation
- Muffler pad designed to provide low noise levels
Accessories
:Applications
:- Automotive service : Loosening and tightening bolts on engines, turbochargers, exhausts, steering and suspension parts, and under‑dash brackets where space is severely limited.
- Motorcycle and small‑vehicle repair : Fasteners around frames, subframes, and tight engine or drivetrain areas that need compact access with strong torque.
- Industrial and plant maintenance : Machinery, pumps, and equipment with recessed or close‑coupled fasteners that a full‑size impact cannot reach.
- Fleet and light truck workshops : Tight‑access fasteners on cabs, chassis, and auxiliary equipment where speed and compactness improve productivity.
Usage
:- Connect the wrench to a clean, regulated compressed‑air supply (typically about 6.2–6.3 bar / 90 psi at the tool) using an appropriate hose and fittings, ensuring the compressor can supply the required CFM.
- Install an impact‑rated 3/8 inch socket, seat it fully on the fastener, and position the compact head where access is tight; use the forward/reverse selector to choose direction before triggering.
- Use short bursts and, if a regulator or power setting is provided in the line or tool, start at the lowest setting that will move the fastener to avoid over‑tightening; confirm critical torque values with a torque wrench.
- Do not run the tool unloaded at full speed for long periods; lubricate regularly by adding a few drops of air‑tool oil in the air inlet and keep air lines drained of moisture.
- After use, disconnect the air line, wipe the tool clean, and store it in a dry toolbox or case to maintain long service life.
Questions & Answers (0)
Select attribute
